Table of Contents
Advertisement
Total Organic Carbon Analyzer
Installation
This manual contains "AS BUILT" drawings and a parts list to aid
in the installation and operation of the analyzer. These drawings should
be referred to when ordering spare parts, operating or servicing the
equipment. See the Appendix for the AS BUILT drawing package.
Installation of the Model 6750 On-line UV/Heated Persulfate TOC
Analyzer includes:
1. Unpacking
2. Mounting
3. Electrical Connections
4. Gas Connections
5. Testing the System
3.1 Unpacking the Analyzer
The analyzer is shipped with all the materials you need to install
and prepare the system for operation. Carefully unpack the analyzer and
inspect it for damage. Immediately report any damage to the shipping
agent.
3.2 Mounting the Analyzer
The analyzer is for indoor use in a general purpose area. The
Hazardous Area Option should be used for applications involving
hazardous areas.
The standard model is designed for wall or rack mounting. Figure
3-1 is an illustration of the mounting and Figure 3-2 shows the required
front door clearance. There are four mounting holes – one in each corner
of the enclosure. Refer to "As Built" drawings in the Appendix.
Teledyne Analytical Instruments
Installation
21
Advertisement
Table of Contents
