Response Time; Average Period; Figure 3-13: Average Value Reset - Teledyne 7600 Operating Instructions Manual

Infrared Gas Analyzer
perform a reset, the contacts must close for at least 1.5 seconds. See
Figure 3-13. Resetting occurs as the contacts reopen.
3.5.7.3 R T
ESPONSE IME
The response time of the electrical system can be changed.
Individual settings are available for each component.
Note: Response time does not provide exact seconds for the
setting time, but rather it is a guide to the overall response.
3.5.7.4 A P
VERAGE ERIOD
This submenu allows you to set an averaging period over which the
average value of O
2
Teledyne Analytical Instruments

Figure 3-13: Average Value Reset

correction and O average are sampled.
2
Operation
79