Teledyne 7600 Operating Instructions Manual page 71

Infrared Gas Analyzer
3. Press the ENT key.
4. In the "Peak Alarm Setting" item selection screen that
appears, point the cursor to any item you want to set by
pressing the UP or DOWN key. Then press the ENT key.
5. Enter numeric values by using the UP or DOWN keys.
Use the SIDE key to move the cursor to the right. Press
the ENT key to save the change.
To close the "Peak Alarm Setting" or cancel the mode midway,
press the ESC key. A previous screen will return.
Description of setting items:
Peak Alarm:
Alarm Value:
Alarm Count:
Teledyne Analytical Instruments
ON/OFF of peak alarm
If measuring value exceeds the set alarm value in
ppm, a peak counter increments by 1.
When a peak in excess of the alarm value occurs,
a peak count is incremented. The alarm count is
Operation
71