Name And Description Of Each Part; Description Of Each Unit - Teledyne 7500 Series Operating Instructions Manual

2. NAME AND DESCRIPTION OF EACH PART

2.1 Description of each unit

Name
1. Handle
2. Power switch
3. Switch for back light
4. Display / Operation panel
5. Sampling gas inlet
6. Sampling gas outlet
7. Purge gas inlet
8. Terminal block 1
9. Terminal block 2
10. Terminal block 3
11. Terminal block 4
12. Terminal block 5
13. Connector 2
14. Power inlet
Teledyne Analytical Instruments
Description
Draws the analyzer unit from the case.
Turns ON/OFF this analyzer.
Turn ON/OFF the back light of display.
Liquid crystal display and keys for various
operational settings are arranged.
Port for connecting the sample gas injection pipe.
Port for connecting the pipe for discharging the
gas after analysis.
Port for connecting the purge gas pipe.
Analog output terminals
Analog signal and contact input terminals
Contact output terminals
Contact output terminal
Alarm output terminal
Communication interface
Used to connect the power cable.
9 Model 7500 Instruction Manual