3.
CONNECTION
WARNING: For avoiding electric shock and malfunctions, do not turn on power supply until
all wiring has been completed.
3.1 Terminal allocation (Input / Output terminal CN2)
Terminal number
2
3
5
Others
3.2
Connection
As connecting cable, use a commercially available RS-232 reverse cable.
Connect the cable to CN2 on the input/output terminal block (on rear for 7500, separate for
7600).
Signal name
Receive data
Transmit data
Signal GND
NC
5
Teledyne Analytical Instruments
Pin connection
9-pin D-Sub (male)