Table of Contents
Advertisement
Oxygen Monitor System
Safety Messages
Your safety and the safety of others is very important. We have
provided many important safety messages in this manual. Please read these
messages carefully.
A safety message alerts you to potential hazards that could hurt you or
others. Each safety message is associated with a safety alert symbol. These
symbols are found in the manual and inside the instrument. The definition
of these symbols is described below:
GENERAL WARNING/CAUTION: Refer to the instructions
for details on the specific danger. These cautions warn of
specific procedures which if not followed could cause bodily
Injury and/or damage the instrument.
CAUTION: H
to heated components within the instrument. Failure to heed the
warning could result in serious burns to skin and underlying
tissue.
WARNING: E
appear within this instrument. This warning is specific to an
electrical hazard existing at or nearby the component or
procedure under discussion. Failure to heed this warning could
result in injury and/or death from electrocution.
Technician Symbol: All operations marked with this symbol are
to be performed by qualified maintenance personnel only.
NOTE: Additional information and comments regarding a
specific component or procedure are highlighted in the form of a
note.
CAUTION:
THE ANALYZER SHOULD ONLY BE USED FOR THE
PURPOSE AND IN THE MANNER DESCRIBED IN THIS
MANUAL.
IF YOU USE THE ANALYZER IN A MANNER OTHER
THAN THAT FOR WHICH IT WAS INTENDED,
UNPREDICTABLE BEHAVIOR COULD RESULT
Teledyne Analytical Instruments
S
W
OT
URFACE
ARNING
S
H
LECTRICAL
HOCK
: This warning is specific
: Dangerous voltages
AZARD
vii
Advertisement
Table of Contents
