Figure 3-10: Range Switch In H2/Co2 Position; Figure 3-11: H2/Co2 Span Trimpot; Figure 3-12: Range Switch In H2/Air Position - Teledyne 2750 Operating Instructions Manual

Installation

Figure 3-10: Range Switch in H2/CO2 Position

9. Use the H /CO
2
±0.1%. See Figure 3-11
10. Select The H2/Air range with the range selector switch. See
Figure 3-12

Figure 3-12: Range Switch in H2/AIR Position

Teledyne Analytical Instruments
span trim pot to adjust the display to 100%
2

Figure 3-11: H2/CO2 Span Trimpot

Model 2750
28