Electrical Connections - Teledyne 3010TB Operating Instructions Manual

Oxygen Analyzer
clearance for the door to open in a 90-degree arc of radius 11.75 inches. See
Figure 3-2.
3.3
Figure 3-3 shows the Control Unit interface panel. Connections for
power, communications, and both digital and analog signal outputs are
described in the following paragraphs. Wire size and maximum length data
appear in the Drawings at the back of this manual.
Figure 3-3: Interface Panel of the Model 3010 Control Unit
For safe connections, ensure that no uninsulated wire extends outside of
the terminal blocks that are attached to. Stripped wire ends must insert
completely into terminal blocks. No uninsulated wiring should be able to
come in contact with fingers, tools or clothing during normal operation.
Figure 3-2: Required Front Door Clearance

Electrical Connections

Teledyne Analytical Instruments
Part I: Control Unit
Part I: 3-3