Teledyne 3010TB Operating Instructions Manual page 18

3 Installation
NPT Fittings
AC POWER IN
3/4" NPT
50/60 HZ
100-240V
3/4" NPT
ALARM OUTPUTS
DIGIT AL INPUT SP AN ZERO
CAL. CONT ACT RANGE
1" NPT
ID CONT ACTS RS-232
SOLENOID RETURN
ANALOG OUTPUTS
1" NPT
REMOTE SENSOR
NET WORK
Figure 3-1: Front Panel of the Model 3010 Control Unit
All operator controls are mounted on the inner control panel, which is
hinged on the left edge and doubles as a door to provide access to the inter-
nal components of the instrument. The door will swing open when the
button of the latch is pressed all the way in with a narrow gauge tool (less
than 0.18 inch wide), such as a small hex wrench or screwdriver Allow
3-2: Part I
supplied by
custom er
Teledyne Analytical Instruments
0.0 % Anlz
AL -1
Model 3010TB
Viewing
W indow
Outer Door
Latch