Main Features Of The Analyzer - Teledyne 3010TB Operating Instructions Manual

Main Features of the Analyzer

The Model 3010TB series Oxygen Analyzers are sophisticated yet
simple to use. The main features of these analyzers include:
• A 2-line alphanumeric display screen, driven by microprocessor
electronics, that continuously prompts and informs the operator.
• High resolution, accurate readings of oxygen content: from low
ppm levels through 25%. Large, bright, meter readout.
• Stainless steel cell block is standard equipment.
• Advance design Micro-Fuel Cell sensor, Specially designed
model for trace analysis, has a one year warranty and an
expected lifetime of two years.
• Versatile analysis over a wide range of applications.
• Microprocessor based electronics: 8-bit CMOS microprocessor
with 32 kB RAM and 128 kB ROM.
• Three user definable output ranges allow best match to users
process and equipment: 0-10 ppm through 0-250,000 ppm for
trace analysis.
• Air-calibration range for convenient spanning at 20.9 %.
• Auto Ranging allows analyzer to automatically select the proper
preset range for a given measurement. Manual override allows
the user to lock onto a specific range of interest.
• Two adjustable concentration alarms and a system failure alarm.
• Self-diagnostic testing, at startup and on demand, with
continuous power-supply monitoring.
• Two way RFI protection.
• RS-232 serial digital port for use with a computer or other
digital communications device.
• Analog outputs for Concentration and Analysis Range: 0–1
V dc standard. Isolated 4–20 mA dc standard.
• Compact and versatile design: flush-panel, rack-mountable, or
bulkhead mounted Control Units available.
Teledyne Analytical Instruments
Trace Oxygen Analyzer
vii