Dimensions - YOKOGAWA Dpharp vigilantplant EJA110A User Manual

10.4 Dimensions

Model EJA110A and EJA120A
External indicator
conduit connection
Blind plug
(Optional)
Vertical Impulse Piping Type
Process connector upside (INSTALLATION CODE '6') (For CODE '2', '3' or '7',
refer to the notes below.)
Process connection
(Optional)
259(10.20)
97
(3.82)
Mounting bracket
(L-type, Optional)
Horizontal Impulse Piping Type
(INSTALLATION CODE '9') (For CODE '8', refer to the notes below.)
94
(3.70) (2.83)
(1.81)
125 (4.92)
2-inch pipe (O.D. 60.5mm)
Note 1: When INSTALLATION CODE '2', '3' or '8' is selected, high and low pressure side on above
figure are reversed.
(i. e. High pressure side is on the left side.)
Note 2: When INSTALLATION CODE '3' or '7' is selected, process connetion and mounting bracket on
above figure are reversed.
Note 3: 15 mm (0.59 inch) for right side high pressure. (for CODE '2', '3' or '8')
12 mm (0.47 inch) for EJA120A.
Note 4: Applicable only for ATEX and IECEx Flameproof type.
External indicator
conduit connection
Blind plug
(Optional)
197 (7.76)
146 (5.75)
Process
connectors
Internal
indicator
(Optional)
Ground
Conduit
terminal
connection
Zero
adjustment
Shrouding bolt
(Note 4)
Conduit
72
connection
Internal
indicator
(Optional)
Process
connections
46
Process
connector
(Optional)
10-9
10. GENERAL SPECIFICATIONS
Unit: mm (approx. inch)
110 (4.33)
54
High
pressure
(2.13)
side
9 (note 3)
(0.35)
110 (4.33)
9 (note3)
(0.35)
Terminal
side
Ground
terminal
High
pressure
side
54 (2.13)
128 (5.04)
Low
pressure
side (Note 1)
Terminal
side
Vent/Drain plugs
2-inch pipe
(O.D. 60.5 mm)
F1002.EPS
Zero
adjustment
Low
pressure
side (Note 1)
Vent plugs
Drain plugs
Mounting bracket
(Flat-type, Optional)
F1003.EPS
IM 01C21B01-01E