General Specifications; Standard Specifications - YOKOGAWA Dpharp vigilantplant EJA110A User Manual

10. GENERAL SPECIFICATIONS

10.1 Standard Specifications

Refer to IM 01C22T02-01E for F
Fieldbus communication type and IM 01C22T03-
00E for PROFIBUS PA communication type
marked with " ".
Performance Specifications
See General Specifications sheet, GS 01C21B01-
00E, GS 01C21B03-00E, and GS 01C21B04-00E.
Functional Specifications
Span & Range Limits
EJA110A and EJA130A:
Measurement
inH
kPa
Span
(/D1)
and Range
Span
0.5 to 10
2 to 40
L
Range –10 to 10 –40 to 40
Span
1 to 100 4 to 400
M
–100 to –400 to
Range
100 400
Span 5 to 500 20 to 2000
H
–500 to –2000 to
Range
500 2000
0.14 to
20 to
Span
14 MPa
2000 psi
V*
–71 to
–0.5 to
Range
2000 psi
14 MPa
* For Wetted parts material code other than S, the ranges
are 0 to 14 MPa, 0 to 2000 psi, 0 to 140 bar, and 0 to
140 kgf/cm 2 .
EJA120A:
Measurement
inH
kPa
Span
(/D1)
and Range
Span
0.1 to 1 0.4 to 4
E
Range
–1 to 1 –4 to 4
URL is define as the Upper Range Limit from the table
above.
Zero Adjustment Limits:
Zero can be fully elevated or suppressed, within
the Lower and Upper Range Limits of the capsule.
External Zero Adjustment " ":
External zero is continuously adjustable with
0.01% incremental resolution of span. Span may
be adjusted locally using the digital indicator with
range switch.
OUNDATION
O mbar mmH
2 2
(/D3) (/D4)
5 to 100
50 to 1000
–1000 to
–100 to 100
1000
10 to 1000
100 to 10000
–1000 to –10000 to
1000 10000
0.05 to
50 to 5000
5 kgf/cm
–5000 to –5 to
5000 5 kgf/cm
1.4 to 1.4 to
140 bar
140 kgf/cm
–5 to –5 to
140 bar 140 kgf/cm
T1001.EPS
O mbar mmH
2 2
(/D3) (/D4)
1 to 10
10 to 100
–10 to 10
–100 to 100
T1002.EPS
Output " ":
Two wire 4 to 20 mA DC output with digital
communications, linear or square root program-
mable. BRAIN or HART FSK protocol are superim-
posed on the 4 to 20 mA signal.
Failure Alarm:
Output status at CPU failure and hardware error;
Up-scale: 110%, 21.6 mA DC or more(standard)
Down-scale: -5%, 3.2 mA DC or less
Note: Applicable for Output signal code D and E
Damping Time Constant (1st order):
The sum of the amplifier and capsule damping
O
time constant must be used for the overall time
constant. Amp damping time constant is adjustable
from 0.2 to 64 seconds.
Capsule (Silicone Oil)
Time Constant (approx. sec)
Ambient Temperature Limits:
* Safety approval codes may affect limits.
EJA110A, EJA130A
2
–40 to 85°C (–40 to 185°F)
–30 to 80°C (–22 to 176°F) with LCD Display
2
EJA120A
–25 to 80°C (–13 to 176°F)
2
Process Temperature Limits:
* Safety approval codes may affect limits.
2
EJA110A, EJA130A
–40 to 120°C (–40 to 248°F)
EJA120A
–25 to 80°C (–13 to 176°F)
Maximum Overpressure:
See General Specifications sheet.
O
Working Pressure Limits (Silicone Oil)
Maximum Pressure Limit:
See 'Model and Suffix Codes'
Minimum Pressure Limit:
Capsule
L, M, H (EJA110A)
M, H (EJA130A)
E (EJA120A) –50 kPa {–7.25 psig}
10-1
10. GENERAL SPECIFICATIONS
-2.5%, 3.6 mA DC or less(Optional
code /F1)
L M H
0.4 0.3 0.3 0.3
Pressure
See Figure 1.
See Figure 1.
IM 01C21B01-01E
V E
0.2
T1003.EPS