Saving Performance Songs Onto Floppy Disk - Roland Atelier AT-90SL Owner's Manual

Max Max Max Max
Min Min Min Min
Saving Performance Songs
Onto Floppy Disk
The performance data that you recorded will disappear
when the power of the AT-90SL is turned off. If you wish to
keep the performance data, you can save it on a floppy disk.
If the performance data has never been saved to a floppy
disk, a " " symbol appears on the Main screen. When
the performance data is saved to a floppy disk, this symbol
will no longer be displayed.
1.
Make sure that the disk drive contains a disk that
was formatted by the AT-90SL.
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04_50
3.
Touch < > (Utility).
The Utility screen appears.
fig.07-22_50
4.
Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
fig.07-22_50
Harmony Intelligence
Chapter 7 Recording/Playing Back What You Play
5.
Touch < >< > to select the number of the
save destination.
Numbers which have not been used in the saving
operation will be displayed as "- - - - -."
fig.07-28_50
To cancel the Save operation, touch the <Exit> to close
the Song Save/Song Delete screen.
6.
Touch <Save>.
The Save Format screen appears.
fig.07-29_50
7.
Touch the screen to select the format in which the
data will be saved.
You can select either "ORIGINAL" or "SMF" format.
Display
Save data in Atelier format
ORIGINAL
Saving in SMF Format for Atelier Sound
SMF
Modules
8.
Touch <OK> to finalize the save format.
Saving of the performance data will begin.
NOTE
Performance data saved by the Atelier cannot be played back
properly by the sound generator of an instrument that is not
a member of the Atelier series.
NOTE
Saving performance data in SMF format (SMF) requires a
longer time than saving it in Atelier format (ORIGINAL).
Description
159