Qr Code (Optional Special Firmware) - SATO CL408 Programming Manual

4. Bar Code Specifications

QR Code (Optional Special Firmware)

Available for CL 412 only (other printers on demand)
Limited factor without Maxicode and Datamatrix
Command Structure:
<ESC>2D30, a,bb,c,d (ee, ff, gg)
a:
bb:
c:
ee:
ff:
gg:
<ESC>DS k, nn...n
k:
nn...n:
<ESC>DN IIII, nn...n
IIII:
nn...n:
160
Two-Dimensional Bar Codes
Error Correction Level L: 7%, M: 15%, Q: 25%, H: 30%
Cell size 01 - 32 dots/cell
Connection Mode 0 = Normal, 1 = Nonnection
(The parameter for "ee", "ff", & "gg" will be used with "1"
if the file is split into several blocks as independent
symbol).
Total Connection Number 01 - 16
Connection Number for each symbol encoded as an in-
dependent one 01 - 16.
Connection Mode Parity Data 00 - FF hex
Input Data Type
1 = Numeric, 2 = Alphanumeric, 3 = Kanji (Shift JIS co-
de)
Data
Data Size 0001 - 7089 bytes
This should be specified with either automatic code or
manual mode with binary.
Data
Programming Manual
SATO RISC Printers