2. Command Codes
Command Structure:
<ESC>(aaaa,bbbb
a:
b:
Example:
Placement:
Default:
Function:
To reverse an image area from black to white and vice versa. Use the
Print Position commands (<ESC>H and <ESC>V) to locate the top left
corner of the reverse image area.
Input:
<ESC>A
<ESC>H0050<ESC>V0120<ESC>L0202<ESC>WB1REVERSE
<ESC>H0250<ESC>V0300<ES C>L0202<ESC>WB1HALF
<ESC>H0040<ESC>V0110<ESC>(370,100
<ESC>H0240<ESC>V0290<ESC>(220,47
<ESC>Q1<ESC>Z
Output:
Note:
1. A reverse image area is affected by the rotate commands. There-
fore, always assume the printer is in the normal print orientation
when designing and sending the Reverse Image command...
84
Reverse Image
Horizontal length in dots of reverse image area
Vertical height in dots of reverse image area.
See Note 6 for field ranges
<ESC>(100,50
This command must be preceded by all other data and be
placed just before <ESC>Q
None
Programming Manual
SATO RISC Printers