2. Command Codes
Command Structure:
<ESC>PR
Example:
Placement:
Default:
Function:
To reset proportional spacing and place the printer to fixed spacing.
Input:
<ESC>A
<ESC>H0025<ESC>V0050<ESC>PS
<ESC>L0202<ESC>XMPROPORTIONAL SPACING
<ESC>H0025<ESC>V0130<ESC>PR
<ESC>L0202<ESC>XMFIXED SPACING
<ESC>Q1<ESC>Z
Output:
Note:
1. This command only works with the proportionally spaced fonts
XU, XM, XS, XL and XB.
2. Once this command is sent in the data stream, it is in effect until
the end of the print job or a reset command is sent.
36
Character, Fixed Spacing
See Above
Preceding the data
The default is Proportional Spacing.
Programming Manual
SATO RISC Printers