SATO CL408 Programming Manual page 127

Programming Manual
$=(data)
#Ea
(aaaa,bbbb
&
/
0 (zero)
*a
@, nn...n
SATO RISC Printers
3. Command Code Quick Reference
b = Font width (50-999 dots*)
c = Font height (50-999 dots*)
d = Font variation (0-9) as follows:
0 Standard
1 Standard open (outlined)
2 Gray (mesh) pattern 1
3 Gray (mesh) pattern 2
4 Gray (mesh) pattern 3
5 Standard, shadow 1
6 Standard, shadow 2
7 Standard mirror image
8 Italic
9 Italic open (outlined)
Data for Vector font.
Print Darkness. Specifies a new print darkness set-
ting. The lightest setting is "1".
Reverse Image. Reverse image from black to white
and vice versa. Units of measure are dots.
Store Form Overlay. Stores a specified label image in
the printer's volatile form overlay memory.
Recall Form Overlay. Recalls the label image from the
printer's form overlay memory for printing.
Replace Data (Partial Edit). Provides the ability to
replace a specified area of the previous label with new
data.
Clear Print Job(s) and Memory. Clears individual
memory and buffers.
a = When not included in command, clears print jobs
in Multi-Buffer mode.
a = If included in command, specifies memory sec-
tion to be cleared
T Custom character memory, printer
& Form overlay memory, printer
X Clears all memory all memory and buffers
Off-Line/Pause. Signals the printer to go off-line after
the completion of a print job.
nn..n = Optional 32 character message to be dis-
played on the LCD.
127