Memory Card Function; Clear Card Memory - SATO CL408 Programming Manual

2. Command Codes
Command Structure:
<ESC>*a,bb
a:
bb:
Example:
Placement:
Default:
Function:
To clear individual memory areas in the Memory Card.
Input:
<ESC>A
<ESC>CC1<ESC>*O,09
<ESC>Z
Output:
There is no printer output as a result of this command.
Note:
1. To clear everything in the memory card, use the <ESC>BJF Mem-
ory Card Initialize command.
2. This command is ignored if there is no data to be cleared.
3. This command is ignored if a memory card is not installed in the
printer.
100

Memory Card Function

Clear Card Memory

Memory card section to be cleared
G To clear SATO graphic files from memory card
P To clear PCX graphic files
F To clear formats from the memory card
O To clear TrueType fonts
Memory Card storage area to be cleared
01 to 99 for Graphics, PCX or Formats
00 to 09 for TrueType fonts
<ESC>*G,01
This command should be sent to the printer immediately
following the <ESC>CC Slot Select command.
None
Programming Manual
SATO RISC Printers