SATO CL408 Programming Manual page 207

Programming Manual
4. Using the hexadecimal data, send the following code to print the
graphic image as designed.
E$ = CHR$(27)
WIDTH "lpt1:", 255
LPRINT E$; "A";
LPRINT E$; "V0100"; E$; "H0100"; E$; "GH006006";
LPRINT "3FFFFFFFFFFC"; "7FFFFFFFFFFE"; "E06000000607";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C06000000603"; "C06000000603"; "C06000000603";
LPRINT "C03FFFFFFC03"; "C01FFFFFF803"; "C00000000003";
LPRINT "C00000000003"; "C00000000003"; "C000FFFF8003";
LPRINT "C001FFFFC003"; "C00303FFE003"; "C00603FFE003";
LPRINT "C00603FFE003"; "C00603FFE003"; "C00603FFE003";
LPRINT "C00603FFE003"; "C00603FFE003"; "C00603FFE003";
LPRINT "600603FFE003"; "300603FFE003"; "180603FFE003";
LPRINT "0C0603FFE007"; "06FFFFFFFFFE"; "03FFFFFFFFFC";
LPRINT E$; "H0200"; E$; "V0100"; E$; "XMSATO Printer Driver"
LPRINT E$; "H0200"; E$; "V0150"; E$; "XMDisk1"
LPRINT E$; "Q1";
LPRINT E$; "Z";
Note: Spaces shown in the hexidecimal listing above are for empha-
sis only. Spaces must not be encoded within the graphic portion of
the data stream to the printer. Also, CR and LF characters to sepa-
rate the lines must not be encoded in the data stream.
SATO RISC Printers
8. Custom Characters And Graphics
207