Track: Internal/External; R.t. Controls: Damper; R.t. Controls: Joystick; Page 15 ‐ Track: Internal/External - Korg microARRANGER Owner's Manual

PAGE 15 - TRACK: INTERNAL/EXTERNAL
This page lets you set the Internal or External status for
each track. It is very useful to let a Style track drive an
external expander, or play a digital piano with one of
microARRANGER's Realtime tracks.
Parameters
Internal The track plays the sounds generated by
the internal sound engine. It does not play
an external instrument connected to the
MIDI OUT.
External The track plays an external instrument
connected to the MIDI OUT. It does not
play the internal sounds, therefore saving
polyphony.
When a track is set to "External", a strings
of transmitted Control Change and Pro‐
gram Change data is shown instead of the
Program name assigned to the track. In
the following example, CC#0 is the Con‐
trol Change 0 (Bank Select MSB), CC#32 is
the Control Change 32 (Bank Select LSB),
PC is the Program Change.
CC#0 CC#32
Both The track plays both the internal sounds
and an external instrument connected to
the MIDI OUT.
PAGE 16 - R.T. CONTROLS: DAMPER
This page lets you enable/disable the Damper pedal for
each of the Realtime (Keyboard) tracks.
D (Damper)
On
Off
E (Expression)
This parameters allows you to switch the Expression
control on/off on each individual Realtime track. The
Expression control is a relative level control, always
subtracted from the Volume value of the track.
As an example, imagine you have a Piano sound
assigned to Upper 1, and a Strings sound assigned to
Upper 2. If you turn the Expression switch on on Upper
2, and off on Upper 1, you can use a pedal to control only
the Strings' volume, while the Piano remains unchanged.
To program a pedal or the Assignable Slider to act as an
Expression control, see "Page 3 ‐ Assignable Pedal/
Footswitch, Assignable Slider" on page 126. You can
only assign this function to a volume‐type pedal, not to
a switch‐type one. Assign the "KB Expression" option
to the pedal or Assignable Slider, then press WRITE to
save the setting into the Global.
PAGE 17 - R.T. CONTROLS: JOYSTICK
This page lets you enable/disable the Joystick for each
of the Realtime (Keyboard) tracks.
PC
Here is the edit procedure:
1.
2.
3.
Style Play operating mode
Page 15 - Track: Internal/External
When you press the Damper pedal and
release the keys, the track's sound is kept
sustained.
The Damper pedal is not active on any
track set to this status.
Use the VOLUME/VALUE (E–H) buttons to select
a track.
Use the F‐3–F‐4 buttons to select the X or Y param‐
eter for that track.
Use the TEMPO/VALUE controls to change the
status.
47