6.
Once the target is selected, press F‐2 (COPY). The
"Overwrite?" message appears:
Press ENTER to confirm overwriting, EXIT to
avoid it.
When you decide to overwrite, the data you are
copying will replace the existing data on the tar‐
get. For example, if the same midifile exists on the
target folder, it will be overwritten. If a USER bank
exists, it will be overwritten.
Data that doesn't exist on the source folder is left
unchanged. For example, if the USER03 Style bank
exists on the target folder, but not in the source
folder, it is left untouched after copying the other
banks.
When you decide not to overwrite, data existing
on the target folder is left unchanged, therefore are
not copied.
7.
The "Are you sure?" message appears. Press
ENTER to confirm, EXIT to abort the copy.
Copying a single file
You can copy a single file from a generic folder to a dif‐
ferent folder. The file must reside on the root (the main/
highest folder in the card hierarchy) or into a generic
folder. You can't copy single files from a ".SET" folder.
1. Insert the card into the card slot.
2.
Press F‐1 to scan the card and show the file list.
3.
Move the folder, containing the file you wish to
copy, to the first line of the display. If it is con‐
tained in another folder, use the F‐3 (OPEN) but‐
ton to open it. Press F‐4 (CLOSE) to go back to the
previous hierarchic level.
4.
Press F‐3 (OPEN) to open the folder containing the
file to copy.
5.
Move the file to copy to the first line of the display.
6.
Once the file is on the first line, press F‐2 (COPY)
to confirm its selection. The window's header
changes from "Copy from" to "Copy to".
7.
Move the target folder to the first line in the dis‐
play.
Press F‐3 (OPEN) to open a folder, F‐4 (CLOSE) to
close it.
Card Edit environment
8.
Once the target is selected, press F‐2 (COPY). The
"Overwrite?" message appears:
Press ENTER to confirm overwriting, EXIT to
avoid it.
When you decide to overwrite, the data you are
copying will replace the existing data on the tar‐
get. For example, if the same midifile exists on the
target folder, it will be overwritten.
Data that doesn't exist on the source folder is left
unchanged. For example, if the MYSONG01.MID
midifile exists on the target folder, but not in the
source folder, it is left untouched after copying the
other data.
When you decide not to overwrite, data existing
on the target folder is left unchanged, therefore are
not copied.
9.
The "Are you sure?" message appears. Press
ENTER to confirm, EXIT to abort the copy.
PAGE 4 - ERASE
The Erase function lets you erase files and folders from
cards.
Erase procedure
1. If the file to be deleted is contained in a card, insert
the card into the card slot.
2.
Press F‐1 to select a device. Devices are selected in
this order: SD
SSD
Device
Type
SD
SD (or MMC) Card
SSD
Solid State Disk (internal memory)
3.
Move the file or folder that you want to erase to
the first line of the display. If the file or folder you
are looking for is in another folder, use the F‐3
(OPEN) button to open it. Press F‐4 (CLOSE) to go
back to the previous hierarchic level.
4.
Press F‐2 (ERASE) to delete the selected item. The
"Are you sure?" message will appear. Press
ENTER to confirm, or EXIT to abort.
When the operation is completed (the "Wait" indi‐
cator disappears), you are kept on the Erase page,
and you may perform further erase operations.
Page 4 - Erase
SD...
139