Edit: Copy; Event Edit; Page 23 ‐ Edit: Copy; Page 24 ‐ Event Edit - Korg microARRANGER Owner's Manual

102 Song operating mode
Page 23 - Edit: Copy
PAGE 23 - EDIT: COPY
Here you can copy tracks or phrases.
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
Note: If you copy too many events on the same "tick", the
"Too many events!" message appears, and the copy operation
is aborted.
Mode
Use this parameter to select the Copy mode.
Merge Copied data are merged with the data at
the target position.
Overwrite Copied data replace all data at the target
position.
Warning: Deleted data cannot be recovered!
FromTrk (From Track)
ToTrk (To Track)
Use these parameters to select the source and target
track to copy.
All All tracks. The target track cannot be
selected.
1...16 Selected source and target tracks.
S/E
The left "S/E" parameters are the starting and ending
measure to copy. For example, if S=1 and E=4, the first
four measures are copied.
S
The right "S" parameter is the first of the target mea‐
sures.
T
Number of times the copy must be executed.
PAGE 24 - EVENT EDIT
Enter this page from the Menu of the Song mode. The
Event Edit page allows you to edit each event in a sin‐
gle track. See "Event Edit procedure" on page 104 for
more information on the event editing procedure.
Event Type First value
Trk (Track)
Track in edit. To select a different track, press one of the
A VOLUME/VALUE buttons to open the Go To Track
window.
Use the TEMPO/VALUE controls to select a track, and
press ENTER to confirm, or EXIT to abort.
1...16 One of the ordinary tracks of the Song.
These tracks contains musical data, like
notes and controllers.
Master This is a special track, containing Tempo
changes, Meter changes, Scale and Trans‐
pose data, and the effect parameters.
Position
Position of the event shown in the display, expressed in
the form 'aaa.bb.ccc':
• 'aaa' is the measure
• 'bb' is the beat
• 'ccc' is the tick (each quarter beat = 384 ticks)
You can edit this parameter to move the event to a dif‐
ferent position.
Ev (Event)
Type and values of the event shown in the display.
Depending on the selected event, the value may
change. This parameter also shows the (non‐editable)
"End Of Track" marking, when the end of the track is
reached.
Here are the events contained in ordinary tracks (1–16).
Event First value
Note Note name
Prog Program Change number
Ctrl Control Change number
Bend Bending value
Aftt Mono (Channel) After-
touch value
PAft Note to which the After-
touch is applied
Second value
Second value
Velocity
–
Control Change value
–
–
Poly Aftertouch value