136
Card Edit environment
Page 2 - Save
5.
Once the target folder is selected, press F‐2 (SAVE)
to save the files. The "Are you sure?" message will
appear. Press ENTER to confirm, or EXIT to abort.
Warning: After confirming, all data in the target folder
is deleted.
When the operation is completed (the "Wait" indi‐
cator disappears), the source page comes back in
the display, and you may perform further saving
operations.
Saving all data of a specific type
You can save all data of a specific type with a single
operation.
1. Insert the target card into the card slot.
2.
The whole content ("All") of the internal memory
is already selected. Press F‐3 (OPEN) to open the
"All" folder. A list of User data types appear (each
type is a separate folder).
3.
Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
4.
Once you have selected the type of data required,
press F‐2 (SAVE) to confirm the selection.
5.
The content of the target card appears.
At this point, you can:
• Create a new ".SET" folder (see "Creating a new
".SET" folder" on page 138).
• Save onto an existing ".SET" folder.
6.
If you are saving into an existing folder, move the
desired ".SET" folder to the first line of the display,
using the E–H (Scroll) buttons (or the TEMPO/
VALUE controls).
7.
Once the target folder is selected, press F‐2 (SAVE)
to save the files. The "Are you sure?" message will
appear. Press ENTER to confirm, or EXIT to abort.
Warning: After confirming, all data in the target folder
is deleted.
When the operation is completed (the "Wait" indi‐
cator disappears), the source page comes back in
the display, and you may perform further saving
operations.
Saving a single bank
You can save a single User bank with a single opera‐
tion. A bank corresponds to a button on the control
panel of the instrument (i.e. a button of the STYLE sec‐
tion).
1. Insert the target card into the card slot.
2.
The whole content ("All") of the internal memory
is already selected. Press F‐3 (OPEN) to open the
"All" folder. A list of User data types appear (each
type is a separate folder).
3.
Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
4.
Once the data type is selected, press F‐3 (OPEN) to
open the folder and gain access to the separate
banks.
5.
Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the bank to save to the
first line of the display.
6.
Once you have selected the bank that you want to
save, press F‐2 (SAVE) to confirm the selection.
7.
The content of the target card appears.
At this point, you can:
• Create a new ".SET" folder (see "Creating a new
".SET" folder" on page 138).
• Save onto an existing ".SET" folder.
8.
If you are saving into an existing folder, move the
desired ".SET" folder to the first line of the display,