3-2. Adjusting the contrast of the operation panel display
2
A
3-3. Production control switch connecting connector
3
2
A
Light
Shade
3
1
1
) Press in the direction of arrow mark the click of
section A of cord outlet cover 2 assembled in
the rear of operation panel 1 and remove the
cover.
2) Turn LCD screen display brightness adjustment
variable resistor 3 to adjust the brightness
(contrast)ofLCDscreen.
1. To prevent the operation panel
from breakage, do not touch the
c i r c u it b oa r d pa tte r n a n d t he
connector terminal.
2. Do not disassemble the operation
panel to prevent it from breakage.
) Press in the direction of arrow mark the click of
section A of cord outlet cover 2 assembled in
the rear of operation panel 1 and remove the
cover.
2) Connect the optional relay cable connector
to CN05 3 of the production control switch
connectingconnector.
Note) Prepare the switch main unit by the
customers or ask JUKI business office
about it.
Optional relay cable A (asm.)
JUKI Part No. 40008168
3 2 1
CN105
+ 5V
1
2
SW
GND
3
– 5–