Programmed Stitching Pattern - JUKI IP-110 Instruction Manual

(3) Programmed stitching pattern

The­constant-dimension­stitching­process­can­be­programmed­as­many­as­20­operation­steps.­The­sewing­
conditions­ including­ the­ number­ of­ stitches,­ needle­ up/down­ stop­ mode,­ automatic­ thread­ trimming,­
continuous­ operation­ steps,­ lifting/lowering­ of­ presser­ foot­ and­ normal/reverse­ feed­ stitching­ can­ be­
separately­ specified­ for­ the­ respective­ operation­ steps.­ If­ the­ lifting­ of­ presser­ foot­ is­ specified,­ the­ time­
during which the presser foot is raised can be also specified.
Example of programmed stitching pattern
4
4
4
20
Step­
Press­ ­to­display­the­pattern­list­screen.
)­ Press­switch­ 1 ­to­select­the­programmed­stitching­pattern,­and­the­screen­is­automatically­changed­over­
to­ the­ programmed­ stitching­ setting­ screen­ to­ display­ the­ number­ of­ stitches­ and­ data­ on­ the­ operation­
step 1 which have already been specified.
[Step 1]
4
Step­4
10
20
Step­3
10
Step­2
1
2 4 6 8 !0
3 5 7 9 !1
Programming­ procedure­ is­ described­ below­
taking the pattern on the left side as an example.
­ – ­­–