JUKI IP-110 Instruction Manual page 77

No. Item
70 Function­of­soft-down­
of­presser­foot
7 Function­of­limitation­
of­re-acceleration­from­
reduction­of­speed
72 Function­of­limitation­
of­acceleration­at­the­
start­of­rotation
73 Retry­function
75 Rotating­direction­of­
motor
76 Function­to­select­the­
start-up­speed­of­the­
sewing­machine
84 Initial­motion­suction­
time­of­presser­foot­
lifting­solenoid
87 Function­of­pedal­
curve­selection
89 Tension­release­
function
9 Function­of­prohibiting­
compensation­
operation­after­turning­
handwheel­by­hand
92 Function­of­reducing­
speed­of­reverse­feed­
stitching­at­the­start­of­
sewing
93 Function­added­to­
needle­up/down­
compensating­switch
94 Continuous­stitching­
+­one-shot­stitching­
non-stop­function
96 Max. number of
rotation­setting
0 Sewing­counter­input­
function
Description
Presser­foot­is­slowly­lowered.
­­­­0­:­Presser­foot­is­rapidly­lowered.
­­­­­:­Presser­foot­is­slowly­lowered.
Speed­limitation­is­performed­at­the­time­of­re-acceleration­on­
the­way­of­reducing­speed­of­the­sewing­machine.
It­is­effective­when­operating­inching­sewing.
Speed­ limitation­ is­ performed­ at­ the­ time­ of­ start-up­ of­ the­
sewing machine (excluding the start of sewing).
­It­is­effective­when­operating­inching­sewing.
This­function­is­used­when­needle­cannot­pierce­materials.
­­­­0­:­Normal
­­­­­:­Retry­function­is­provided.
Normal­rotating­direction­of­motor
­­­­0­:­Clockwise
­­­­­:­Counterclockwise
Starting­curve­of­the­sewing­machine­is­selected.
­­­­0­:­Normal­curve
­­­­­:­More­sharp­curve
Suction­motion­time­of­presser­foot­lifting­solenoid
Pedal­curve­is­selected.­(Improving­pedal­inching­operation)
2
Number of rotations
0
Unused
It­ is­ effective­ in­ combination­ with­ the­ machine­ head­ provided­
with­tension­release­function.
­­­­0­:­Tension­release­function­is­ineffective.
­­­­­:­Tension­release­function­is­effective.
Function­to­reduce­speed­at­the­time­of­completion­of­reverse­
feed­stitching­at­the­start­of­sewing.
­­­­0­:­Speed­is­not­reduced.
­­­­­:­Speed­is­reduced.
Function­to­reduce­speed­at­the­time­of­completion­of­reverse­
feed­stitching­at­the­start­of­sewing.
­­­­0­:­Speed­is­not­reduced.
­­­­­:­Speed­is­reduced.­(Upper­stop → upper stop)
In­IP-0­program­functions,­a­function­that­does­not­stop­the­
sewing­machine­by­combining­continuous­stitching­with­
one-shot­stitching­when­the­step­is­changed.
­­­­0­:­Normal­(The­sewing­machine­stops­when­a­step­is­
­­­­­­­­­completed.)
­­­­­:­The­sewing­machine­does­not­stop­when­a­step­is­
completed and proceeds to next step.
Max. number of rotation of the sewing machine head can
be­set.
*­Setting­differs­according­to­the­resistor­pack­to­be­connected.
This­function­selects­the­input­destination­of­the­sewing­
counter.
­­­­0­:­Every­time­thread­trimming­is­performed,­the­counter­
­­­­­­­­­automatically­counts­up.
1 : The counter counts up by inputting of the external
­­­­­­­­­sewing­counter­SW­
1
Pedal stroke
pper­stop)
–­74­–
Panel­display
Setting­ Setting­
Standard­set­
level range
value
F-SDFL
2 0­to­
F-ACRA
2 0­to­5
F-ACR
 0­to­5
F-RET
 0­to­
2 0­to­
F-SCS
2 0­to­
40­to­ T-PUT
2
300
F-PCS
2 0­to­2
2 0­to­
F-PMAT
2 0­to­
F-DSBT
2 0­to­
F-MADF
2 0­to­
F-SBTC
2 0­to­
50­to­ S-MAX
2
Max
F-MAC
2 0­to­
0
0
0

DM
0
0
00
0
TRS
0

0
0
0
3200
0