JUKI IP-110 Instruction Manual page 78

No. Item
05 Touch­back­switch­ When­ connecting­ IP-0­ and­ selecting­ the­ corner­ pattern,­ this­
needle­up/down­ function­performs­compensating­stitching­during­sewing­in-corner­
compensating­ with­the­touch­back­switch.
stitching­function ­­­­0­:­Touch­back­switch­compensating­stitching­is­invalid.
­­­­­:­Touch­back­switch­compensating­stitching­is­valid.
*­Possible­to­set­when­selecting­the­head­of­LH-468­or­LH488.
06 Presser­lifting­ When­ connecting­ IP-0­ and­ selecting­ the­ corner­ pattern,­ this­
switch­one­stitch­ function­performs­compensating­stitching­during­sewing­in-corner­
compensating­ with­the­presser­lifting­switch.
function ­­­­0­:­Presser­lifting­switch­compensating­stitching­is­invalid.
­­­­­:­Presser­lifting­switch­compensating­stitching­is­valid.
*­Possible­to­set­when­selecting­the­head­of­LH-468­or­LH488.
*­ When­ using­ this­ function,­ set­ the­ presser­ lifting­ switch­ function­
selection­(No.­7)­to­"0"­(function­invalid).
07 In-corner­sewing­ When­connecting­IP-0­and­selecting­the­corner­pattern,­this­
one-shot­function function­performs­the­in-corner­sewing­with­the­one-shot­automatic­
sewing.
­­­­0­:­One-shot­automatic­sewing­of­the­in-corner­sewing­is­invalid.
­­­­­:­One-shot­automatic­sewing­of­the­in-corner­sewing­is­valid.
*­Possible­to­set­when­selecting­the­head­of­LH-468­or­LH488.
08 In-corner­presser­ When­ connecting­ IP-0­ and­ selecting­ the­ corner­ pattern,­ this­
lifting­function function­ automatically­ lifts­ the­ presser­ after­ completion­ of­ the­ in-
corner­sewing.
­­­­0­:­Automatic­presser­lifting­after­the­in-corner­sewing­is­invalid.
­­­­­:­Automatic­presser­lifting­after­the­in-corner­sewing­is­valid.
*­Possible­to­set­when­selecting­the­head­of­LH-468­or­LH488.
*­This­function­is­valid­only­when­Auto-lifter­(AK)­is­connected.
09 Resewing­function­ When­ connecting­ IP-0,­ this­ function­ stops/uses­ resewing­ (re-
sewing­from­a­point­on­the­way).
­­­­0­:­Resewing­function­is­invalid.
­­­­­:­Resewing­function­is­valid.
*­Possible­to­set­when­selecting­the­head­of­LH-468­or­LH488.
0 Separately­ When­selecting­reverse­stitching­pattern/overlapped­stitching­pat-
driven­needle­ tern,­this­function­stops/uses­the­separately­driven­needle­change-
changeover­ over­function.
function­(free­ When­ "0"­ (invalid)­ is­ selected,­ the­ separately­ driven­ needle­
stitching/ changeover­ is­ not­ possible­ with­ reverse­ stitching­ pattern/over-
overlapped­ lapped­stitching­pattern.­
stitching) ­­­­0­:­Separately­driven­needle­changeover­function­(during­free­
­­­­­­­­­stitching)­is­invalid.
­­­­­:­Separately­driven­needle­changeover­function­(during­free­
­­­­­­­­­stitching)­is­valid.
*­Possible­to­set­when­selecting­the­head­of­LH-468­or­LH488.
 Separately­ When­ connecting­ IP-0­ and­ selecting­ the­ corner­ pattern,­ this­
driven­needle­ function­stops/uses­the­separately­driven­needle­changeover­
changeover­ function.
function­(corner­ When­"0"­'invalid)­is­selected,­it­is­not­possible­to­optionally­
pattern) perform­the­separately­driven­needle­changeover­with­the­corner­
pattern.
­­­­0­:­Separately­driven­needle­changeover­function­(during­corner­
­­­­­­­­­pattern)­is­invalid.
­­­­­:­Separately­driven­needle­changeover­function­(during­corner­
­­­­­­­­­pattern)­is­valid.
*­Possible­to­set­when­selecting­the­head­of­LH-468­or­LH488.
Description
­ – ­75­–
Panel­display
Setting­ Setting­
Standard­set­
level range
value
C-BT
2 0­to­
C-FT
2 0­to­
A-
2 0­to­
ALIF
2 0­to­
STRT
2 0­to­
MEDL
2 0­to­
ANDL
2 0­to­
0

0