JUKI IP-110 Instruction Manual page 50

5) Modification of the pattern
[To add the step]
1. When adding the step, press the switch to which nothing is registered (example in the illustration is
SW­ 1 ).
2.­ Corner­type­which­is­used­in­the­step­and­the­kind­of­return­are­selected­in­the­step­edit­pop-up.
1 ­and­ 2 ­:­These­switches­select­the­corner­type.
3 ­and­ 4 ­:­These­switches­select­the­kind­of­return.
5 ­:­Change­is­determined­and­the­screen­returns­to­the­step­setting­screen.
­ There­are­4­kinds­of­returns­in­total.
­ : Return is performed after executing the selected corner step.
­ ­­­:­­ Return­is­not­performed.
­ ­­­:­­ It­is­the­step­on­the­way­of­return.­It­cannot­be­selected­in­the­last­step.
­ : 2-needle sewing is performed after executing the selected corner, and return is performed.
When
­
1
1
2
or is selected in the kinds of returns, the step after it is deleted.
3
4 5
–­47­–