Connecting The Cord - JUKI IP-110 Instruction Manual

2. CONNECTING THE CORD

WARNING :
Turn OFF the power and start the work after 5 minutes or more have passed so as to prevent
accidents caused by abrupt start of the sewing machine.
)­ Pass­ cord­ 1 ­ and­ FG­ cord­ 3 ­ (for­ type­ C)­ of­ the­
operation­ panel­ through­ hole­ A ­ in­ the­ machine­
table­to­route­it­to­the­underside­of­the­table.
3
4
3) For type C, fix FG cord 3 ­to­the­power­switch­with­wood­screw­ 4 ­supplied­with­the­panel­as­accessories.
­ Wire­FG­cord­ 3 ­after­bundling­it­with­the­power­cable­and­the­like­with­cable­clip­band­ 5 ­supplied­with­
the­panel­as­accessories.
A
1
3
2
2)­ Connect­ the­ connector­ of­ cord­ 1 ­ to­ connector­
CN34­ 2 in the control box.
Bottom surface of table
5
–­2­–
1