Removing And Installing The System Side Cover; Remvoing The System Side Cover; Figure 20. Removing The Side Cover - Intel S2600CP Service Manual

Removing and Installing the System Side Cover

Remvoing the System Side Cover

®
The Intel Server System P4000CP family must be operated with the top cover in place to
ensure proper cooling. You will need to remove the top cover to add or replace components
inside of the platform. Before removing the top cover, power down the server and unplug all
peripheral devices and the AC power cable.
/
NOTE
A non-skid surface or a stop behind the chassis may be needed to prevent the chassis from
slding on your work surface.
1. Observe the safety and ESD precautions at the beginning of this book.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the screws (see letter "A").
5. Slide the side cover back (see letter "B") and lift the cover outward to remove it.
®
Intel Server Board S2600CP Intel

Figure 20. Removing the Side Cover

®
Server System P4000CP Family Service Guide (Preliminary)
Hardware Installations and Upgrades
19