System Jumpers; Figure 10. Configuration Jumpers - Intel S2600CP Service Manual

System Jumpers

The figure below shows the locations of System Jumpers on Intel
Jumper Name Pins
1-2
BIOS Recovery
2-3
1-2
BIOS Default
(a.k.a CMOS
2-3
Clear)
1-2
ME Force
Update
2-3
1-2
BMC Force
Update
2-3
1-2
Password Clear
2-3
®
Intel Server Board S2600CP Intel
Pins 1-2 should be connected for normal system operation. (Default)
The main system BIOS does not boot with pins 2-3 connected. The system only boots from EFI-
bootable recovery media with a recovery BIOS image present.
These pins should have a jumper in place for normal system operation. (Default)
If pins 2-3 are connected when AC power unplugged, the CMOS settings clear in 5 seconds.
Pins 2-3 should not be connected for normal system operation.
ME Firmware Force Update Mode – Disabled (Default)
ME Firmware Force Update Mode – Enabled
BMC Firmware Force Update Mode – Disabled (Default)
BMC Firmware Force Update Mode – Enabled
These pins should have a jumper in place for normal system operation. (Default)
To clear administrator and user passwords, power on the system with pins 2-3 connected. The
administrator and user passwords clear in 5-10 seconds after power on. Pins 2-3 should not be
connected for normal system operation.

Figure 10. Configuration Jumpers

®
Server System P4000CP Family Service Guide
Server System Features
®
Server Board S2600CP.
System Results
9