Table of Contents
Advertisement
Chapter 3
Support Anywhere
Server
After setting the
server to receive
using
pcANYWHERE32, the
server may be taken
over by the remote
console.
Figure 12: A Typical Installation of Graphics Console Redirection
A window on the console display exactly mimics the display at the NetServer. In
this way, you can take full control of your HP NetServer from the remote console.
However, to enable graphics redirection, pcANYWHERE32 software must be
installed on both the NetServer and the remote console.
NOTE
pcANYWHERE32 graphics console redirection requires your
HP NetServer to be running Windows NT. In addition,
pcANYWHERE32 operates only on consoles running either
Windows 95 or Windows NT.
pcANYWHERE32 allows you to redirect what's graphically displayed on an HP
NetServer running Windows NT 3.51 or 4.0 to a remote Windows NT 3.51 or
Windows 95 PC console.
Installation of pcANYWHERE32 is a two-part process. Separate setup steps are
required for installation at the NetServer and at the workstation designated as the
remote console.
54
Installing the HP Support Anywhere Software
Modem
Modem
NetServer
Remote
Console
Support Anywhere
Remote Console
Using a modem, the
offsite remote console
workstation, using
pcANYWHERE32, may
dial into and take full
graphic control of the
HP NetServer.
Advertisement
Table of Contents
