Part 2. Setup At Each Hp Netserver; Installing On Novell Netware Servers - HP Support Anywhere Installation And User Manual

Chapter 3
Figure 8: HP Support Anywhere Group in Program Manager for Windows
NOTE
After you have installed Support Anywhere, Auto Alert is
automatically loaded every time you boot the Support
Anywhere Client. If you don't want Support Anywhere's Auto
Alert feature to load automatically, remove the program from
the Startup Group.

Part 2. Setup at Each HP NetServer

Installing on Novell NetWare Servers

The server software including all applicable web components is installed
automatically during Support Anywhere client setup. If you opted not to install
the Support Anywhere software on your NetWare servers, you may do so now by
re-running Client Setup (Part 1). See "Setup at the Client Workstation" for
detailed information.
After you've finished installing Support Anywhere client software, be sure to
leave your Support Anywhere Client running so you can test your server
connection(s).
To complete setup, at each NetServer you identified in client installation, you
need to restart the NetServer to complete the installation.
Unless you also have Windows NT NetServers to set up, proceed to Part 3:
Verify Correct Installation. Except for verification of operation, your
installation is complete.
Installing the HP Support Anywhere Software
NT 3.51 or Windows for Workgroups
31