Table of Contents
Advertisement
Chapter 2
Windows for Workgroups 3.1, or 3.11, running in enhanced mode. If
you plan on managing Novell NetWare servers, your Windows for
Workgroups Support Anywhere Client must be configured for
NetWare network access. Run Network Setup from the Network group
in the Windows Program Manager to verify or change your Windows
network configuration.
Windows NT Workstation 3.51 (For Support Anywhere's NetWare
features to work properly with the Windows NT NetWare Client
Services, you must replace Microsoft's NETWARE.DRV file with the
copy included in the NET33X.EXE update supplied by Novell
Corporation through CompuServe, or the World Wide Web.)
Windows 95
Network operating system client software (one or both of the following):
Novell NetWare NETX shell v3.26 or VLM client v1.1 with either
IPX.COM v3.10 or IPXODI.COM v2.10 protocol drivers for IPX
support
TCP/IP stack that includes a Windows Sockets stack. For clients
running Windows for Workgroups, Microsoft's TCP/IP-32 software
includes a Windows Sockets stack.
Web Browser Software Supported
For web-based management support you need to have a web browser installed on
the workstation you designate as your client. The Support Anywhere web
interface can function using either one of the following web browsers:
Netscape Navigator, v2.0 and v3.0
Microsoft Internet Explorer, v3.0 (Windows 95 only)
NOTE
For information about Support Anywhere that was not
available when this guide was published, see the Support
Anywhere README.WRI file. To view this file, click the
README icon in the Support Anywhere Program Manager
Group.
22
Introducing HP Support Anywhere
Advertisement
Table of Contents
