Setting Up The Polycom Hdx System; Updating The Polycom Hdx System Software; Connecting The Phone To The Polycom Hdx System - Polycom SoundStation IP 7000 Integration Manual

Setting Up the Polycom HDX System

Updating the Polycom HDX System Software

Connecting the Phone to the Polycom HDX System

Note
Note
Integrating the SoundPoint IP 7000 Conference Phone with a Polycom HDX System
For information on installing the Polycom HDX system, refer to the Setup
Sheet for your system at
For information on configuring the Polycom HDX system, refer to the
Administrator's Guide for Polycom HDX Systems at
http://www.polycom.com/videodocumentation.
Before you connect the SoundPoint IP 7000 phone to a Polycom HDX system,
verify that the software running on the Polycom HDX system is at version 2.5
or later. To verify the software version, using the HDX remote, go to to System
> System Information. If the software is not 2.5 or later, update the system
software using the Polycom HDX Web Interface, so the system will integrate
with the phone. Refer to Installing Polycom HDX Software and Options and the
Release Notes for Polycom® HDX Systems available at
www.polycom.com/videodocumentation.
If a Polycom SoundStructure™ C-Series digital mixer is already connected to the
Polycom HDX system, you cannot connect the SoundPoint IP 7000 phone to it. If
you connect the phone, the message "Daisy-Chaining Error: Unsupported link.
Contact IT Manager." appears.
When you connect the phone to the Polycom HDX system, you need the
Polycom HDX Microphone Cable, which is the cable used to connect your
Polycom HDX Microphone to the Polycom HDX system.
Only a single SoundPoint IP 7000 phone may be connected to a Polycom HDX
system. Additionally, up to two Polycom HDX Microphone Arrays may be
daisy-chained with the phone on the same Polycom HDX Microphone Cable.
To connect the SoundPoint IP 7000 phone to the Polycom HDX system:
1. Disconnect the Polycom HDX Microphone from the Polycom HDX
system.
If you have an additional Polycom HDX Microphone Cable, leave the
existing microphone connected to the Polycom HDX system and use the
additional cable to connect the phone to existing the microphone.
http://www.polycom.com/videodocumentation.
5