Polycom CenturyLink SoundStation IP 7000 Quick User Manual

SoundStation
Quick User Guide
Applies to phones running SIP 3.0 or later.
For detailed information please consult the comprehensive
SoundStation IP 7000 User Guide available at:
http://www.polycom.com/products/voice/conferencing_solutions/conference_phones/index.html
BASIC PHONE
FEATURES
PLACING A CALL
Press and then choose either Video
or Phone Call. Dial the number.
Or, dial the number fi rst, and then
press or the Dial soft key. When
prompted, choose either Video or
Phone Call.
ANSWERING A CALL
Press or the Answer soft key.
Incoming calls may be ignored
by pressing the Reject soft key
during ringing.
ENDING A CALL
Press or the EndCall soft key.
LED INDICATORS
The LEDs located at the top of each
speaker indicate the current status.
Green: Your call is in progress.
Flashing green: A call is incoming.
Blinking green: Your call is held by the
other party.
Red: Your call is muted.
Flashing Red: You have voice mail.
Blinking red: You have placed the call
on hold.
IP 7000
®
MICROPHONE MUTE
During a call, press
using external microphones, you can
also press on the microphones.
You can hear all other parties while
Mute is enabled.
To turn off Mute, press
CALL HOLD AND RESUME
1. During a call, press the Hold soft key.
2. Press the Resume soft key to resume
the call.
CALL TRANSFER
1. During a call, press the Trnsfer soft
key (the active call is placed on hold).
2. Place a call to the party to which you
want to transfer the call.
3. After speaking with the second party,
press the Trnsfer soft key to complete
the transfer.
Press the Blind soft key to transfer
the call without speaking to the
second party.
Transfer may be cancelled during
establishment by pressing the
Cancel soft key. The original call is
resumed.
CALL FORWARDING
To enable call forwarding:
. If you are
1. Press the Forward soft key from the
phone's idle display or press
select Features, and then Forward.
2. Enter a number to forward all future
again.
calls to.
3. Press the Enable soft key to confi rm
Call Forwarding. A moving arrow
icon appears for that line to confi rm
Call Forwarding is enabled.
To disable call forwarding:
1. Press the Forward soft key from the
phone's idle display or press
select Features, and then Forward.
2. Press the Enable soft key.
Call forwarding is not available on
shared lines.
If call forwarding is confi gured on
the call server (invoked using *
code dialing or from a PC-based
application), then particulars and
menu options may vary.
LOCAL CONFERENCE CALLS*
To create a three-way local
conference call:
1. Call the fi rst party.
2. Press
create a new call (the active call is
placed on hold).
3. Place a call to the second party.
and
and
or the Confrnc soft key to