Lift-Off Oven Door - GE CS980 Owner's Manual

GEAppliances.com
The gasket is designed with a gap
at the bottom to allow for proper air
circulation.
Do not rub or clean the door gasket-it
has an extremely low resistance to
abrasion.
If you notice the gasket becoming
worn, frayed or damaged in any way
or if it has become displaced on the
door, you should have it replaced.
Cleaning the Oven Door
Tocleanthe insideof the doon
Because the area insidethe gasketiscleaned
duringthe self-cleancycle,
you do not needto cleanthis by hand.
Thearea outsidethe gasketand the door liner
can be cleanedwith a soap-filled
or plasticscouringpad,hotwater and
detergent.Rinse wellwith a vinegar
and water solution.
Tocleantheoutsideof thedoor:
Usesoapand waterto thoroughlycleanthe top,
sidesand front of theovendoor.Rinse well.You
may alsousea glasscleanerto cleanthe glass
on the outsideof the door.Donot letwater drip
into thevent openings.
tf anystain on the doorvent trim ispersistent,
usea softabrasivecleaner
and a sponge-scrubber for bestresults.
Spillage of marinades, f ruitjuices,tomato
saucesand bastingmaterialscontainingacids
maycausediscoloration and should
bewipedup immediately. Whensurfaceis
cool,cleanand rinse.
Donot useovencleaners, c leaningpowdersor
harshabrasives on the outsideofthe door.
II!
Pull hinge locks down to unlock.
Removal position
Lift-Off Oven Door (on some models)
The door is very heavy. Be careful when removing [_
and lifting the door.
Do not liftthe door by the handle.
Toremovethe doon
[Z] Fullyopenthe door.
[] Pullthe hingelocksdown toward thedoor
frame,to the unlocked position.A tool,suchas
a smallflat-bladescrewdriver, m ay be required.
Firmlygraspbothsidesof the door
at the top. r_
%
Close door to the door removalposition, w hich
is halfwaybetweenthe broilstop positionand
fully closed.
[] Lift door up and out untilthe hingearm
is clearof the slot.
To replace the door:
Firmlygraspbothsidesof the door
[Z] at the top.
Withthe door at Bottom
the sameangle edge of
asthe removal slot
\
position,seat
the indentation
of the hingearm
intothe bottom
edgeof the
hingeslot.The
notch in the hingearm mustbe fully seated
intothe bottomof the slot.
Hinge arm
Fullyopenthe door.if the doorwill not fully
open,the indentationisnot seatedcorrectlyin
the bottomedgeof the slot.
r4] pushthe hinge locksup againstthe front frame
of the ovencavityto the lockedposition.
@
Hint
tack
Hinge
arm
Push hinge locks up to lock.
Close the ovendoor.
33