Troubleshooting - Montigo H38DF PRC Installation & Maintenance Manual

Troubleshooting

SIT Nova 820
The following is a troubleshooting chart of possible problems:
PROBLEM
Noisy Pilot Flame
Pilot won't ignite
Main burner will
not light
SIT Proflame
The following is a troubleshooting chart of possible problems
PROBLEM
Pilot won't ignite or spark.
Main burner will not light.
All spare parts, optional fans, and optional trim finishes are available from your local Montigo dealer.
XG0211 - 040912.1
Maintenance
CORRECTIVE ACTION
Locate pilot adjustment screw on
gas control valve. Flame is decreased by
turning adjustment screw clockwise.
Disconnect remote wires and try to
light pilot. If pilot now works, remote
connections are faulty. Check wiring
diagram figure 29.
1. Check wiring (see figure 29).
2. Check wall switch for proper
connection.
SOLUTION
- Check the on the batteries on the
remote or the receiver.
- Check the green LED on AC adaptor
-Check the green ground wire under
the valve
- Check the wiring on the valve as per
diagram Fig 18
If your fireplace still does not operate correctly, consult your local Montigo dealer.
All service and repairs should be performed by a qualified Technician.
Honeywell Electronic Ignition
The following is a troubleshooting chart of possible problems
:
H*38DF PRC Panorama Indoor Gas Fireplace
:
Page 29