Section 2: Framing The Fireplace - Montigo H38DF PRC Installation & Maintenance Manual

H*38DF PRC Panorama Indoor Gas Fireplace
Section 2: Framing
Frame in the enclosure for the unit with framing materials. The
1).
framed opening for the assembled fireplace is 40 3/4" wide, x 44"
high x 24 1/2" deep, see Figure 2
NOTE: When constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed. See Figure 21.
40 3/4"
Figure 2. Framing dimensions.
Combustible
Framing Header
1" Min.
12" Max.
33 1/2"
Figure 3. Combustible Framing for shelves over the fireplace, Rear vent.
Note: HP38DF* CANNOT be straight run rear vented with wall termination.
Combustible
Framing / Header
MEL Short
90 elbow
46" ‡
1 Min."
Figure 4. Combustible Framing for shelves over the fireplace, Top vent.
‡ HP38DF* is 59"
Page 6
Installation
.
44"
24 1/2"
shelf
11"
44"
29
shelf
17 1/2"
44"
Top Vent
Min. 1 "
Combustible
Header
84"
Min.
44"
Figure 5. Non Combustible Framing with alcove above fireplace, Top Vent.
Ceiling level
Non-Combustible
materials. Alcove
over fireplace.
Non-Combustible
Header
Non-Combustible
Materials, with Low
profile mantel / Alcove
2"
over fireplace.
39 5/8"
door
opening
Floor
XG0211 - 040912.1