Led Remote Control Operation; Led Troubleshooting - Montigo D3615 Installation & Maintenance Manual

LED Remote Control Operation

Use AUX function to turn power on to LED
NOTE: The color being touched on the ring doesn't necessarily
mean the same color will be displayed on the LED kit, keep
moving along the wheel until the desired color is displayed
Montigo's Distinction series fireplaces have integrated LED lighting
installed beneath the burner tray. The LEDs are controlled by the
included remote. The fireplace burner does not need to be lit for
the LEDs to function.
The LEDs can be set to any solid color using the color wheel on
the remote control, or to any of the 20 patterns listed below. The
speed and brightness of the various functions can also be adjusted
by the remote.
LED Troubleshooting
The LEDs are pre-wired inside the control panel and fireplace;
ensure that all wiring is connected before troubleshooting.
If the LEDs are lit but cannot be controlled by the remote, first
change the remote's batteries.
If the remote still cannot control the LED lighting, you may need to
pair the remote with the controller.
If the LEDs will not light, measure the voltage on the power
supply's output (underneath burner tray), the output should be
24VDC.
If a portion of the LED strip displays a single color only, the LEDs
must be replaced.
Figure 30. LED remote
46
# Mode
1 Static white color
2 White color gradual changes
3 All colors gradual change
Red/green/ blue three colors
4
gradual change
5 Seven colors jump to change
6 Three colors jump to change
7 Red/ green jumps to change
8 Red/blue jumps to change
9 Blue/green jumps to change
10 White color frequently blinks
11 White color glitters
12 Red color frequently blinks
13 Red color glitters
14 Green color frequently blinks
15 Green color glitters
16 Blue color frequently blinks
17 Blue color glitters
18 Yellow color frequently blinks
19 Yellow color glitters
20 Circulation mode
Figure 30.c Remote modes
Item
Working Voltage
Radio Frequency
Modulate Method
Transmit Power
Standby Power Consumption
Remote Distance
Dimension
Figure 30.b Remote parameters
Operation
Speed
Brightness
State State
Adjustable Unadjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Adjustable Adjustable
Parameters
AAA*2pcs(3V)
2400-2483.5MHz
GFSK
6db
10uA
20-30m
110×52×30mm
XG0222