Changing The Osd Language; Adjusting The Picture Orientation; Rear Projection; Ceiling Mode - Runco Quantum Color Q-750i Series Installation & Operation Manual

When you turn on the Q-750i for the first time, the OSD Language Menu appears.
The Q-750i can display the menus in English, French, German, Italian, Spanish, Swedish,
Portuguese or Russian.
Press or to select a language. Then, press ENTER to confirm your selection.
If the Q-750i is installed behind the screen, you must change the picture orientation to
match the installation method. To do this, press MENU on the remote control. Then,
select System from the Main Menu.
If the projector is used in a rear-projection application (see Figure 3-5), press
to select Rear Projection from the System Menu. Press
If the projector is ceiling-mounted, the Q-750i automatically inverts the image. If this
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off.
Q-750i Series Installation/Operation Manual
repeatedly
or to set it to On.
37
Installation
3.10
Changing the OSD
Language
3.11
Adjusting the Picture
Orientation

Rear Projection

Ceiling Mode