Autoscope Lens Motor Installation - Runco Quantum Color Q-750i Series Installation & Operation Manual

Installation
Install Lens Motor:
1. Position the AutoScope Lens Motor as shown in Figure 3-8.
2. Line up the mounting holes on the lens motor housing with those on the underside of
the projector.
3. Secure the motor to the projector with the eight (8) remaining M6 x 12mm Pan-Head
Phillips screws.
Figure 3-8. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the Q-750i
on page 29.
26 Q-750i Series Installation/Operation Manual