Specifications; Q-750I Specifications - Runco Quantum Color Q-750i Series Installation & Operation Manual

Led home theater projectors
Hide thumbs Also See for Quantum Color Q-750i Series:
Table of Contents

Advertisement

Table 7-1 lists the Q-750i specifications.
Table 7-1. Q-750i Specifications
Projector Type:
Illumination:
Native Resolution:
Aspect Ratios:
Video Standards:
Video Compatibility:
Picture Size (16:9 Screen):
Throw Distance
(Factor x Screen Width):
Vertical Offset:
Horizontal Offset:
Video Inputs:
Control Options:
RS-232 Communication
Parameters:
+12V Outputs:
Q-750i Series Installation/Operation Manual
Digital Light Processing™ (DLP™),Single-Chip, 16:9
SuperOnyx™ DMD™ with InfiniLight
TM
RGB InfiniLight
LEDs for 135% NTSC color gamut with
TM
Runco Smart Color
and Personal Color Equalizer
Full HD, 1920 x 1080 (16:9)
4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema
HDMI and DVI with HDCP for digital video, Component and
RGB HDTV (1080p, 1080i, 720p), Component and RGB EDTV
(576p, 480p), Component, Composite and S-Video SDTV
(576i, 480i), RGB SCART with adapter, NTSC (M,4.43), PAL
(B,G,H,I,N,M), SECAM (M)
480i, 480p, 576i, 576p, 720p, 1080i 50/60, 1080p 24/50/60
Recommended Width: 72 in. (1.83 m) to 92 in. (2.34 m)
Maximum Width: 108 in. (2.74 m)
Refer to Table 3-3
Standard Q-750i - 60% of screen height above or below lens
center (120% of one half of the screen height)
Q-750i/CineWide or Q-750i/CineWide with AutoScope -
25% of screen height (50% of one half of the screen height)
above or 60% of screen height (120% of one half of the screen
height) below lens center, when projector is inverted
Q-750i Ultra - 35% of screen height above or below lens
center (70% of one half of the screen height)
Standard Q-750i - 12.5% of screen width left or right of lens
center (25% of one half of the screen width)
Q-750i Ultra - 7.5% of screen width left or right of lens center
(15% of one half of the screen width)
(2) HDMI; (2) Component (RCA, BNC); (1) RGB (HD15); (1)
S-video; (1) Composite; (1) RS-232; (1) IR Repeater
- Discrete IR remote
- Serial commands via RS-232
38400 bps, no parity, 8 data bits, 1 stop bit, no flow control
Max. 0.25 Amps, programmable; Tip = +12V; Sleeve =
Ground

7. Specifications

TM
Illumination
TM
87
7.1

Q-750i Specifications

Advertisement

Table of Contents
loading

Table of Contents