Runco Quantum Color Q-750i Series Installation & Operation Manual page 44

Led home theater projectors

Hide thumbs Also See for Quantum Color Q-750i Series:

Table of Contents

Installation

To install the fixed CineWide base plate on a Q-750i/CineWide:

1. Place the projector upside down on a blanket or other soft surface.

2. Place the CineWide base plate on the bottom of the projector.

3. If you are mounting the projector on a ceiling: Line up the three holes on the left

and right mounting rails (included with the projector ceiling mount kit) with those on

the projector and base plate.

4. Secure the CineWide base plate (and ceiling mounting rails, if needed) to the projector

with the Pan-Head Phillips screws provided with the CineWide lens base plate.

1. Do not use the mounting screws provided with the ceiling

Caution

mounting kit. Use only the hardware provided with the CineWide

lens base plate.

2. DO NOT OVER-TIGHTEN THE SCREWS.

Q-750i Series Installation/Operation Manual

Table of Contents