Auto Repeater Function; D Frequency Range And Offset Direction - Icom IC-80AD Instruction Manual

5
REPEATER AND DUPLEX OPERATIONS

Auto repeater function

The U.S.A. and Korean versions automatically use standard
repeater settings
(duplex ON/OFF, duplex direction, tone encoder
when the operating frequency falls within or outside
ON/OFF)
of the general repeater output frequency range. The offset
and repeater tone frequencies are not changed by the auto
repeater function. Reset these frequencies, if necessary.

D Frequency range and offset direction

• U.S.A. version
FREQUENCY RANGE
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
442.000–444.995 MHz
447.000–449.995 MHz
• Korean version
FREQUENCY RANGE
439.000–440.000 MHz
32
SHIFT DIRECTION
"DUP–" appears
"DUP" appears
"DUP" appears
"DUP–" appears
SHIFT DIRECTION
"DUP–" appears
U.S.A./KOREAN versions only
q Enter "AUTORP" in FUNC set mode (SET).
MENU SET FUNC
(Push [MENU ]), (Push [ ](2)/[ ](8), then push [
w Push [ ](2) or [ ](8) to select the auto repeater setting.
U.S.A. version:
• "RPT1" : Activates duplex only. (default)
• "RPT2" : Activates duplex and tone.
• "OFF" : Auto repeater function is turned OFF.
Korean version:
• "ON" : Activates duplex and tone. (default)
• "OFF" : Auto repeater function is turned OFF.
e Push [ ](5) to return to FUNC set mode, and then push
[MENU ] to return to frequency indication.
Auto repeater setting
AUTORP (p. 126)
](5).)
U.S.A. version
Korean version