Power Save; Auto Power Off; Auto Power On - Icom IC-80AD Instruction Manual

Vhf/uhf digital transceiver
Hide thumbs Also See for IC-80AD:
Table of Contents

Advertisement

13
OTHER FUNCTIONS

Power save

The power save function reduces the current drain to con-
serve battery power.
The power save duty cycle, the ratio of receive circuit on
to receive circuit off during standby, can be set to auto-
matic1
, 1 : 4
(default)
, automatic2, in addition stopping the operation of
1200msec.)
the digital block when in DV mode, or OFF with "P SAVE" in
FUNC set mode (SET).
MENU
SET
(Push [MENU
• "AUTO1" selects "1:4" duty ratio when receiving no signal for 5
sec., then "1:8" 60 sec. after that.
• "AUTO2" suppresses the consumption of the battery by stopping
the operation of the digital block when in DV mode in addition to the
operation of AUTO1.
No signal
5 sec.
Circuit ON
Circuit OFF
156
, 1 : 8
(150 msec. : 600msec.)
FUNC
P SAVE (p. 125)
]), (Push [ ](2)/[ ](8), then push [
600 msec.
1200 msec.
150 msec.
60 sec.

Auto power OFF

The transceiver can turn itself OFF automatically after a
specified time. Activating a control restarts the time-out. The
transceiver beeps before turning OFF.
120 min., 90 min., 60 min., 30 min. and OFF can be specified.
The specified period is retained even when the transceiver
(150 msec. :
is turned OFF by the auto power-off function. To cancel the
function, select "OFF" in the auto power-off item in set mode.
This can be selected with "AP OFF" in FUNC set mode
(SET).
](5).)
MENU
(Push [MENU

Auto power ON

The transceiver can be set to automatically turn ON after a
specified period. The timer can be selected within 30 min. to
24 hrs. in 30 min. steps. Once this timer turns the transceiver
power ON, the auto power-on is automatically cancelled.
This can be selected with "AP ON" in FUNC set mode (SET).
MENU
(Push [MENU
When operating with battery pack or case and the battery
is exhausted, auto power-on does not function.
During standby, a small current still flows in the radio.
SET
FUNC
AP OFF (p. 128)
]), (Push [ ](2)/[ ](8), then push [
SET
FUNC
AP ON (p. 128)
]), (Push [ ](2)/[ ](8), then push [
](5).)
](5).)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents