Alarm Area - Icom IC-80AD Instruction Manual

8
GPS/GPS-A OPERATION
D Alarm area 1
Sets GPS alarm active range from 00.08' to 59.99' in 00.01'
steps.
q Enter "ALM1" in GPS set mode.
MENU GPS
(Push [MENU
• ALM1 setting screen is displayed.
When "P FORM" (position format) (p. 136) is selected "mm.mm."
When "P FORM" (position format) (p. 136) is selected "mm.SS."
w Push [ ](2) or [ ](8) to set the desired alarm area.
• Push [ ](6) to move the cursor right; push [ ](4) to move the
cursor left.
e Push [ ](5) to set the area.
r Push [MENU
The alarm area 1 function is available when the "GPS
ALARM" function ALL is ON.
88
(default: 00.25')
ALM1
]), (Push [ ](2)/[ ](8), then push [ ](5).)
] to return to frequency indication.
• Example: Your position
ALM AREA1 setting : 00.25'
00.25' 00.25'
Point A
Your position
Point C
• Position of point A : 35°00.25'N/134°59.75'E
• Position of point B : 35°00.25'N/135°00.25'E
• Position of point C : 34°59.75'N/134°59.75'E
• Position of point D : 34°59.75'N/135°00.25'E
When the target position comes into the alarm area shown
above, the GPS alarm sounds.
These sample indications assume that "P FORM" is selected
"mm.mm." (p. 136)
: 35°N/135°E
(default)
N
Point B
Point D