Deleting Fax Information - Ricoh 9016 Operating Instructions Manual

Fax Features
Programming/Changing Own Fax Number
A
Select [Own Fax Number] using {U} or {T}, and then press the {OK} key.
B
Enter the source fax number using the number key, and then press the {OK}
key.
4
To change the programmed source fax header, press the {Clear/Stop} key, and
then enter again.
When you enter "+" and space, press [n], [Space] for each.
If you make a mistake, press the {Clear/Stop} key, and then enter again.
Note
! You can register "Own Fax Number" using up to 20 numbers, space, and
"+" symbol.

Deleting Fax Information

A
Select [Fax Features] using {U} or {T}, and then press the {OK} key.
B
Select [General Settings/Adjust] using {U} or {T}, and then press the {OK} key.
90