Ricoh 9016 Operating Instructions Manual page 116

Connecting the Machine
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
IEEE 802.11b (wireless LAN).
1
For details about how to specify the settings, see "Interface Setting".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communictn.
Interface Settings/Network Permit SSL/TLS Comm.
Interface Settings/Network Host Name
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Note
! In [Effective Protocol], check that the protocol you want to use is set to [Active].
! [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.47 "Interface Settings"
28
User Tool
Communication Mode
SSID Setting
Channel
Security Type
Communication Speed
Setting Requirements
Necessary
As required
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
Necessary
As required
As required
As required
As required