Canceling A Transmission; Before The Original Is Scanned; While The Original Is Being Scanned - Ricoh FAX Option Type 3030 Operating Instructions Manual

Canceling a Transmission

This section explains how to cancel a fax transmission.
Important
❒ Remember that the Communicating indicator turns off almost immediately
when an Internet Fax is being sent.

Before the Original Is Scanned

Use this procedure to cancel a transmission before pressing the {Start} key.
A
Press the {Clear Modes} key.
Note
❒ When originals are placed into the ADF, you can cancel transmission sim-
ply by removing them.

While the Original Is Being Scanned

Use this procedure to cancel a transmission while the originals are being
scanned after the {Start} key has been pressed.
A
Press the {Clear/Stop} key.
The machine stops scanning.
Note
❒ You can also cancel scanning by pressing [Stop Scanning].
❒ Scanning may be completed while you are performing the cancel operation.
ZLBS050E
Canceling a Transmission
1
99